Ford Focus ST 2.0 Ecoboost | PEC high output steel connecting rod
Uprated engine internals for the Ford Focus ST 2.0ltr EcoBoost.
H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength. Small ends are bushed for a fully floating pin and big ends are fitted with high-quality ARP fasteners with different specification bolts available depending on the level of performance required.s prevent hot spots on the piston crown.
PEC rods are designed to withstand roughly 225hp per cylinder (typically 900hp on most 4cyl engines) and on the ARP 2000 series 3/8 bolts normally provided & have an 8,500 RPM safe operating limit (engine specific).
In some cases, we recommend using the ARP custom age bolts available from us. This increases the hp threshold to 250hp per cylinder and raises the RPM limit to 9,000 however as every engine is different, these numbers are not guaranteed for every configuration.
Prolonged high RPM's for drifting, or sudden bursts of torque for drag racing (as two examples) will warrant the use of the custom age bolts to help retain the clamping force between the big end cap and the connecting rod.
|Engine Type||2.0 EcoBoost Turbo|
|Small End Dia||23.00mm|
|Small End Width||21.00mm|
|Big End Dia||55.00mm|
|Big End Width||22.00mm|
Total Amount Payable£1762.86
We Also Recommend